image

Ltop 501

Used in spaces like the banks or corporate headquarters where an esthetic excellence is a priority to impress the visitors. The architects and interior designers have many options to customize this model and create arich and opulent look. Among the decorative materials that can be used to transform this model into a visual master piece are marble and granite as well as leather and all kinds of wood finish including wallnut, oak, andolive. Operation LTOP 501 optical turnstiles form a corridor.

In the middle ofthis corridor, there’s a wing obstacle made up of glassor plexiglass. When the visitors have their cards readby the card reader, the wing opens. While the visitorsare passing through the gate, if another person wantsto take advantage of the open turnstile and tailgatebehind the first visitor, the obstacle closes and blocksthe passage immediately and sets off the alarm.However, if the sudden closure of the wing has thepotential to harm an individual, it does not close but thealarm continues to alert the security. In contrast, LTOP 501 has the obstacle moving in andout in a straight linear fashion, thus providing a morereliable access control system.

 

 

  • Operation: Controlled or control-free entrance/exit in both directions.
  • Chassis: AISI 304 quality stainless steel.
  • Wing: 10 mm tempered glass than can open in either direction.
  • Upper Table: 1O mm black tempered glass.
    • Mechanism: Wings are operated by means of a servomotor. Precision motor movement with 16 bit microcontroller and encoder support, and motor-locking in the event of unauthorized pass.
  • Sensors: 14 reciprocal sensors in every turnstile.
    • Emergency Mode: Turnstile switches to emergency mode upon the receipt of a signal from fire detection system and wings open in predefined direction.
  • Safety Level Setting: With 4 security levels that can be defined as desired by the customer, turnstile is able to detect unauthorized passes and passes in the opposite direction and emits audio or discreetly.
  • Indicator: Led lighting around the top plate and transition Leds.
  • Wing Speed: 0.6 Sec (Opening – Closing)
  • Passage Speed: ~60 persons / minute.
  • Passage Width: 55cm
  • Power Consumption: 20W during passage, 08W during standby (For two wings).

Features

  • Operation

    Controlled or control-free entrance / exit in both directions.

  • Chassis

    AISI 304 quality stainless steel. Optional: Black stainless steel.

  • Wing

    10 mm tempered glass that can open in either direction.
    Optional: Smoke colored glass

  • Upper Table

    10 mm black tempered glass.

  • Functions

    Works bidirectionally and allows the passage of a single person only with its microprocessor control, electronic passage memory feature saves in memory card swipes that occur before a passage is completed and allows them to pass without
    closing the wings. Optional: 2 x RS232 and 1 x RS485 communication ports.

  • Mechanism

    Wings are operated by means of a servomotor. Precision motor movement with 16 bit microcontroller and encoder support, and motor-locking in the event of unauthorized pass

  • Sensors

    14 reciprocal sensors in every turnstile.

  • Emergency Mode

    Turnstile switches to emergency mode upon the receipt of a signal from fire detection system and wings open in predefined direction

  • Safety Level Setting

    With 4 security levels that can be defined as desired by the customer, turnstile is able to detect unauthorized passes and passes in the opposite direction and emits an audio or discreet warning

  • Indicator

    Led lighting around the top plate and transition leds.

Specifications

  • Operating Voltage
  • 100-230 VAC. 47-60 Hz

  • Power Consumption
  • 20W during passage, 8W during standby (For two wings).

  • Operating Temperature
  • 0° / +55°

  • Passage Speed
  • ~60 persons / minute.

  • Wing Speed
  • 0.6 sec (Opening - Closing).

  • Passage Width X Weight
  • 55 cm x ~105 kg (Single wing)

  • Security Level
  • Deterrent

  • Areas of Use
  • Suitable for indoor use.

  • Accessories
  • Logo engraving. Sticker. Remote control unit. Stainless steel reader apparatus. Meter. Button control unit. Stainless steel reader leg. Stainless steel bottom plate.

Download Brochure